GTi Pro Gravity Feed Spray Gun
1.3mm & Spare 1.4mm
Black, Blue, Gold
Building on the heritage of the first GTi gravity models the GTi Pro has now firmly established itself globally as the first choice for the application of all types of water and solvent-borne basecoats.
A new generation of larger “Pro” HVLP and Trans-Tech air caps provide unparalleled atomisation for longer, more uniform spray patterns giving perfect colour accuracy in pearlescents and flake lay in metallics and micas.
In approval tests with paint company technicians the GTi Pro has consistently met the highest colour match standards to ensure that you get it right, first time, every time.
Coupled with performance is precision engineering that optimises control, comfort and balance. The re-profiled trigger and patented, balanced air valve guarantee positive but smooth, “no-kick” operation.
Cup Capacity – 560 mls
Weight (gun & cup) – 823 gms
Air Cap – Plated Brass
Air Cap Retaining Ring – Clear Anodised aluminium
Fluid Tips – Stainless Steel
Fluid Needle – Stainless Steel
Air Inlet Thread – 1/4” Universal
Air Cap TE20 – clear coat with faster flow
Application: Clear coats (especially HS and UHS clear coats) Recommended for polyurethane clear coats (in combination with 1.3mm nozzle)
Performance: Spray Pattern: 285-300 mm (11-12″)
Air Flow (@ 2bar): 350 lpm (12.4 cfm)
Comments: Faster than TE10
In connection with 1.3mm nozzle widely recommended for 2K gloss / clear coat
What are the recommended air pressures for the air caps?
The air pressure depends on different factors, e.g. the fluid to be sprayed or whether the fluid control is full open or not. A good starting point are following pressure settings:
HV25/30 Air cap/s: 1.5 – 1.75 bar (22-25 PSI)
TE10/20, T110 Air cap/s: 1.5 – 2 bar (22-29 PSI)